Active control and a simple estimation method for the onset of Rayleigh-Bénard convection in temperature-dependent-viscosity liquids

Active feedback control for the onset of Rayleigh-Bénard Convection in temperature-dependent-viscosity liquids is investigated. In this paper, three major problems are addressed: (1) The results of Tang-Bau control are improved by considering the effects of temperature-dependent viscosity; (2) A more efficient two-plate control strategy is presented. A phenomenon of coalescence of the unstable modes is observed as the controller gain is large enough; (3) A simple way to estimate the critical Rayleigh number under the effects of temperature-dependent viscosity is described. Numerical results show that the effects of temperature-dependent viscosity on the critical Rayleigh number should be taken into account in some cases and the onset of Rayleigh-Bénard convection can be effectively delayed or advanced by the active feedback control strategies studied here.     

III-Nitride Quantum Devices—Microphotonics

Photonic devices based on III-nitrides offer benefits such as UV/blue emission, large band offsets of InN/GaN/AlN heterostructures allowing novel quantum well (QW) device design, and inherently high-emission efficiencies. Furthermore, due to their mechanical hardness and larger band gaps (when compared with conventional semiconductor devices), III-nitride-based devices may operate at much higher temperatures and voltages/power levels for any dimensional configuration and in harsher environments than other semiconductor devices and are expected to provide much lower temperature sensitivities. These are crucial advantages for many applications. Over the last decade, the physics of microsize photonic devices has been investigated. New physical phenomena and properties are expected to dominate as the device size scales down. The microsize light emitters offer benefits over edge emitters such as the ability to create arrays of individually controllable pixels on a single chip, enhanced quantum efficiency, and greatly reduced lasing threshold. Rapid progress in the area of III-nitride microphotonics has been made. The growth and fabrication of micron and submicron size photonic structures based on III-nitride wide bandgap semiconductors has been achieved, and the technology has made it possible to integrate arrays of optical elements to form active photonic-integrated devices. One example is an interconnected µ-LED with enhanced emission efficiency over the conventional LEDs for the same device area. Another example is a µ-LED array with independently addressed pixels or III-nitride microdisplay. III-nitride microdisplay may offer performance that is superior to microdisplays fabricated from liquid crystals and organic LEDs. The third example presented is III-nitride UV Focal Plane Arrays (UV-FPA) of detectors. So far, the operation of AlGaN UV-FPA with size up to 256×256 pixels with 30×30?μm² unit cells has been demonstrated. Together with the nature of their two-dimensional array, these active micro-photonic devices show promise in many important applications, such as optical communications, signal and image processing, optical interconnects, computing, enhanced energy conversion and storage, chemical, biohazard substances, and disease detection, missile and shellfire, atmospheric ozone-level, and flame sensing. III-nitride microlens arrays have been fabricated successfully for blue and UV wavelength applications on GaN and AlN. The successful fabrication of microlens arrays based on III-nitride materials opens the possibility for monolithically integrating nitride-based micro-size photonic devices, as well as coupling light into, out of, and between arrays of III-nitride emitters and detectors, especially for short wavelengths covering the green-blue to deep UV (200?nm) region. Nanofabrication and characterization of photonic crystals with diameter/periodicity as small as 100/180?nm on InGaN/GaN MQW has been achieved. An unprecedented maximum enhancement factor of 20 was obtained under optical pumping. Single-mode ridged optical waveguide devices using GaN/AlGaN heterostructures have been designed, fabricated, and characterized for operation in 1550?nm wavelength window. The feasibility of developing novel photonic integrated circuits based on III-nitride wide bandgap semiconductors for fiber-optical communications has been investigated.     

Nonparametric estimation of distributions with categorical and continuous data

In this paper we consider the problem of estimating an unknown joint distribution which is defined over mixed discrete and continuous variables. A nonparametric kernel approach is proposed with smoothing parameters obtained from the cross-validated minimization of the estimator's integrated squared error. We derive the rate of convergence of the cross-validated smoothing parameters to their ‘benchmark’ optimal values, and we also establish the asymptotic normality of the resulting nonparametric kernel density estimator. Monte Carlo simulations illustrate that the proposed estimator performs substantially better than the conventional nonparametric frequency estimator in a range of settings. The simulations also demonstrate that the proposed approach does not suffer from known limitations of the likelihood cross-validation method which breaks down with commonly used kernels when the continuous variables are drawn from fat-tailed distributions. An empirical application demonstrates that the proposed method can yield superior predictions relative to commonly used parametric models.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

小阶跃反应性输入时点堆中子动力学方程的解析解

对小阶跃反应性输入（0<ρ,０<β）且有温度反馈时点堆中子动力学方程进行了研究. 导出任意初始功率条件下核反应堆功率、反应性与时间的解析表达式. 分析和讨论了初始功率与输入小阶跃反应性的大小对功率、反应性变化规律的影响，得到了一些新的结果. 关键词： 中子动力学 反应性 点堆 温度反馈     

Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

Miniature InGaAsP/InP phase modulator for integrated opto-electronics

Miniature, etching ridge InGaAsP/InP Phase Modulator with highly efficient phase shifting efficiency of 60°/V.mm and 43°/V.mm for TE and TM modes, respectively, and 3 dB bandwidth of 650 MHz at 1.52 μm are reported. It is well suited for integrated opto-electronics. Some functions depending on bandwidth of the devices are discussed.     

五种氨基酸钆络合物的ESR波谱

迄今未见任何稀土氨基酸络合物的ESR波谱报道,本文在合成Gd³⁺分别与甘氨酸、β-丙氨酸、谷氨酸、天冬氨酸和天冬酰胺五种氨基酸络合物的基础上,测定了不同温度下,水溶液、粉末及分子筛吸附样品的ESR谱,讨论了络合物中晶体场强,对称性及成键特性。     

Effect of transverse object position on the reconstructed image of an aperture-limited in-line hologram

It is experimentally demonstrated that the image resolution from an in-line Fraunhofer hologram degrades appreciably when the centre of the diffraction pattern from a 5-bar resolution target is located asymmetrically in the hologram aperture. This effect is confirmed and analysed using calculated and experimentally measured images from holograms of a one-dimensional wire. Increasing asymmetry results in an increasing error in the measured linewidth, and a reduction of image resolution. A simple model based on average fringe contrast is used to predict this decrease in resolution with transverse object position.     

红外折/衍混合离轴望远系统设计

本文针对空间光学系统轻型特点,设计了一个二元光学折/衍混合红外反射式望远系统。采用了离轴式格里高利(Gregorian)结构形式,消除了望远系统中的中心遮拦问题。用衍射光学元件校正系统象差,使反射面为球面,二元光学表面尺寸比施密特(Schmidt)校正板(位于入瞳处)缩小于3～4倍,光学设计运用OSLO软件,光学系统的通光孔径φ=120mm,焦距f=-1000mm,波长λ=4.3μm,视场2ω=2°×6°(子午×弧矢),分辨率Res=0.05mm,MTF≥0.4(空间频率fre≤10cl/mm).